How Many Solar Panels Fit on My Roof? A 2-Minute Check
"How many panels fit on my roof?" is usually the first question when you start thinking about solar – and the answer decides almost everything else: system size, yearly yield, cost and payback. This guide shows how to estimate the number yourself and how to get a precise layout for your own roof in about two minutes with RoofSun.
The quick rule of thumb
A modern solar module measures about 1.7 × 1.1 m, around 1.9–2 m², and delivers 400–450 W. Because you need gaps between panels and a margin along the roof edges, you can use only part of the roof surface.
As a rough guide:
| Usable roof area | Panels (≈ 430 W) | System size |
|---|---|---|
| 20 m² | about 8 | ≈ 3.5 kWp |
| 35 m² | about 14 | ≈ 6 kWp |
| 50 m² | about 20 | ≈ 8.5 kWp |
In other words: about 5–6 m² of usable roof per kWp. "Usable" is the important word – the real number is often a third lower than the gross roof area.
What reduces the number of panels
- Edge setbacks. Installers keep a margin of about 30–50 cm to the eaves, ridge and verge so that wind loads stay manageable.
- Fire setbacks. On semi-detached and terraced houses, building codes often require a gap to the neighbouring roof. In Germany it ranges from 0.5 to 1.25 m depending on the state.
- Chimneys, roof windows and vents. Each obstacle needs a gap around it and often takes out a whole row or column.
- Roof shape. Hipped roofs have triangular and trapezoid planes where rectangular panels fit poorly.
- Shade. A panel that sits in shade for most of the day isn't worth installing even if it fits.
Counting by hand
- Measure the length of the eaves and the slope length from eaves to ridge for each roof plane you want to use.
- Subtract the edge setbacks on all sides.
- Divide the remaining width by the module width and the remaining height by the module height (try both orientations, portrait and landscape).
- Round down and subtract panels that clash with chimneys or windows.
This works for a simple gable roof. For hips, dormers or several roof planes it quickly becomes tedious – and you still don't know how much electricity the panels will make.
Checking your roof with RoofSun
RoofSun does the counting on the satellite map and calculates the yield straight away:
- Find your roof. Search your address and zoom in until you see your house.
- Outline the roof plane. Tap the corners on the satellite map, tap the first corner again to close the outline, then tap the lower edge – where rainwater runs off. A magnifier and snapping help you place each corner precisely. You can add up to 8 roof planes.
- Set the pitch. Pick a typical pitch for your roof type, use the slider, or lay your iPhone on a rafter and use it as an inclinometer.
- Let RoofSun lay out the panels. It fills each plane with as many modules as fit, with edge setbacks and gaps around chimneys and windows. Choose from 30 popular modules or enter your own.
- Read the result. You see the number of panels, the system size in kWp and the yearly yield in kWh with an honest range.
If the satellite image is blurry or you are planning a balcony system, tap Enter size manually and type in the dimensions instead.
From panel count to yearly yield
The number of panels is only half the answer. Two roofs with 14 panels can differ by a fifth or more in yield depending on direction, pitch and shade. As a rough reference, a south-facing system in Germany produces about 900–1,100 kWh per kWp per year; east- and west-facing roofs make roughly 15–20 % less but spread production more evenly over the day.
RoofSun calculates every hour of a typical year for your exact location with solar data from PVGIS, the European Commission's solar database, so you get a figure for your roof instead of a national average. Measuring the pitch and marking trees or neighbouring buildings narrows the range.
What to do with the result
- Compare it with installer offers. If an offer shows far fewer or far more panels than your own layout, ask why – there may be a good reason, such as a fire setback or a weak roof section.
- Try variants. Fewer, larger modules or a different orientation sometimes fit better than the first layout.
- Check the economics. With your electricity price and consumption you can see whether a larger system really pays off or whether a smaller one with a battery is the better fit.
An app can't replace an on-site visit: the roof structure, fixings and electrical connection always need a qualified installer. But it gives you a realistic starting point – and better questions for the first conversation.
Frequently asked questions
How much roof space does 1 kWp need?
With today's 400–450 W modules, plan on roughly 5 to 6 square metres of usable roof per kilowatt-peak, including the gaps between panels.
Do I need to measure my roof before using RoofSun?
No. You outline the roof on the satellite map and RoofSun calculates the lengths. If the satellite image is poor, you can enter the dimensions by hand instead.
Is the panel count from an app final?
No. It is a solid estimate for planning and for comparing offers. An installer checks the roof structure, fixings, fire setbacks and electrics on site before the final layout.